NIST Home Page MML Home Page Navigational links also at page bottom
 
• Introduction  
• Sn-Pb Properties and Models  
• Sn-Ag Properties and Creep Data  
• Sn-Ag-Cu Properties and Creep Data  
• General Conclusions/ Recommendations  
• Acknowledgements  
• References  
     
  For more information contact:  
  metallurgy@nist.gov  
 
Sn-Ag Properties and Creep Data
 
  Overview and Conclusions  
  Bulk Sn-3.5Ag Tensile Creep  
  • Source and Plot of Data  
  • Specimens  
  • Microstructures  
  • Data Analysis  
  • Discussion  
  • Comparison to Sn-4Ag Tensile Creep Data  
  Sn-3.5Ag Compression Creep  
  • Raw Data  
  • Data Analysis  
  • Comparison of Tensile and Compressive Creep  
  Creep of Sn-3.5Ag Lap Shear and Plug & Ring Joints  
  • Shear Joint Sizes  
  • Sn-3.5Ag Lap Joint and Plug & Ring Shear Data  
  • Analysis of Sn-3.5Ag Lap Joint and Plug & Ring Shear Data  
  • Comparison to Sn-3.65Ag and Sn-4Ag Data  
  Creep of Sn-3.5Ag CCC Solder Joints in Shear  
  • Darveaux's Sn-3.5Ag Data  
  • Fit of Darveaux's Data to Lap Shear and Plug & Ring Correlation Band  
  • Regression of Darveaux's CCC Shear Data  
  Creep of Sn-3.5Ag Flip-Chip Solder Joints in Shear  
  • Flip-Chip Sn-3.5Ag Shear Data  
  • Comparison of Flip-Chip and CCC Solder Joint Shear Data  
  Other Properties of Sn-3.5Ag  
  • Young's Modulus vs. Temperature  
  • Poisson's Ratio  
  • Coefficients of Thermal Expansion (CTE)  
  • Other Physical Properties  
  Discussion  
  • Data Scatter  
  • Multiaxial Conditions  
  • Constitutive Modeling  
  • Recommendations  
 
Materials Science and Engineering Division | metallurgy@nist.gov
Home | Personnel | Research Opportunities

The National Institute of Standards and Technology (NIST) is an agency of the U.S. Commerce Department.
Privacy policy / security notice / accessibility statement / Disclaimer / Freedom of Information Act (FOIA) / No Fear Act Policy /
ExpectMore.gov (performance of federal programs) / NIST Information Quality Standards

Last modified: by Metallurgy Webmeister